Availability: Available now: Phaserunner V6 L10!!! There’s one version for 2023 with an L10 connector, in either dark or metallic. It’s ace! More details to follow shortly. TTL to USB Cable required for setup. Everything is sold separately! Click here to see what is available.
Discontinued: Due to ship shortages, both the LiGo and LiGo+ Batteries are now fully sold out and Grin are unable to produce more. A fully redesigned device (called LiGo_10X) is in development for 2023. Batteries like Lego? Oh yes! Grin Technologies offer this glorious solution, which enables us to pick and choose the perfect blend of capacity, voltage and usable range, slot them together & go! The LiGo Series are ideal for having a lightweight set-up on a bike most of the time, expanding it for longer journeys as required. Ride with just what you need. There are two 36V… Read more →
Grin Technologies’ V3 Cycle Analyst is the defacto unit for managing Custom eBike builds. With near unlimited programming available through your computer, you can tweak your bike to be just as you like it to be. This really helps with managing power delivery on heavily laden bikes, preventing motor heat-up and similar damage at all speeds and load levels. Onscreen data is there both to monitor and control, so you can see your power input/output, realtime consumption, temperature levels and full electronic management. Version 3 takes a centralised approach, with all communications running through the head unit and one unified… Read more →
Do you already have a Brompton for your daily commute and feel like adding a little magic? Well, Grin Technologies’ Brompton Conversion Kit may be just the thing! It has been developed to retain all the quick folding goodness you chose your bicycle for in the first place, whilst multiplying the effort you put in so you can get a whole lot more out of it. Your current front wheel makes way for a new one which includes a 250W motor in the hub, then the electronics follow your existing cables along the frame. These connect the motor to the… Read more →
The new Baserunner V4 Series from Grin Technologies is a fully integrated, waterproof Controller for use with a variety of Hub Motor combinations, with/without the Cycle Analyst, handling up to 60V Max and 80A Peak Phase Currents (45-50A Continuous). This ensures compatibility with most eBike systems available today and programmable options for flexibility in future. All of the new V4 models include the WP8 CA Plug, with either Hailong, Reention, Tube, Fork or Plate Mounts to match your bike’s arrangement and a 38cm cable length via Z910 HiGo 9 pin plugs or L1019 10 pin. Extension cables from Controller to… Read more →
Leftfield Bikes: Riding, Re-invented We’re busy preparing new bicycles, plus our new spot,
This is a 300 watt power point tracker (MPPT), from Grin Technologies for hooking-up your Sunpower solar panel to your eBike battery. Capable of 28-96V output for higher voltage batteries, you can also assign custom voltages, or use the stock 48V/60V/72V lead acid/LiFe profiles. Note: it is not waterproof! The unit is terminated with Anderson Power Pole connectors for maximum compatibility. This solar charge controller can even boost the voltage of your solar panels (15-40V typically) to match those of your battery pack. There is one button to program all output voltage options too, which is great. When using with… Read more →
For most programming you will need to link up with the TTL to USB cable to Mac/PC/Android. The Controllers we offer include the 3.5mm Jack. The XLR adapters below are for the Cycle Satiator, which includes a 3-pin male XLR plug as standard. You may need a combination of different adapters to suit different batteries, depending on which you use. USB Connector: • TTL to USB Programming Cable XLR Connectors: • XLR Anderson Satiator • XLR DC2.5 • XLR to Male XT60 • XLR to Female XT60 • XLR RCA • XLR 3 to 4 Pin • XLR Rosenberg •… Read more →